• 5-6-week-delivery 5-6 Week Delivery
  • 1-year-warranty 1 Year Warranty
  • made-in-the-uk Made in the UK
  • dip-treated Dip Treated

10' x 3' (3.05x0.91m) Traditional Pent Tool Store Shed

In stock
Product code:
SHS17729

This 10x3 Traditional Pent Tool Store is made from enhanced timber which provides its superior quality.

  • Free Treatment
  • Quality Redwood T&g Cladding
  • Traditional Pent Tool Store Includes Felt, Fixings & Instructions
  • Key Operated Lock
£389.95
Rating:
93%
  • Detailed Specification
  • Description
  • Reviews 21
  • Delivery
More Information
Short name 10'x3' Traditional Pent Tool Store Shed
Assembly Time (estimated) 2-4 hours
Annual Treatment Yes - by Customer
Base Size Required (minimum) 3050 x 910
Brand Traditional
Cladding Thickness 12
Colour Brown
Delivered From Factory
Delivery Point Kerb-side or Driveway
Door Height 1460
Door Opening Height 1460
Door Type Single Door (hinged)
Door Width 762
Eaves Height 1610
External Depth 3050
External Width 910
Finish Planed (smooth)
Floor Material Tongue and Groove
Floor Thickness 12
Size 10' x 3'
Fully Framed No
Guttering Included No
Instructions Included Yes
Locking System Key Operated Lock
Packaged Format Flat-packed
Persons to Assemble 2 people
Product Type Sheds
Ridge Height 1710
Roof Covering Felt
Roof Material Tongue and Groove
Roof Thickness 12
Roof Type Pent
Material Wooden
Translucent Roof Sheets No
Treatment Dip Treated
Wall Cladding Tongue and Groove
Warranty 12 (parts) months

The 10x3 Traditional Pent Tool Store from the Treetops Traditional range. This 10x3 tool shed model is fully clad (no windows) with quality Deal Redwood 12mm PAR finished (16mm nominal) tongued and grooved (TandG) shiplap cladding, that enhances both the quality and appearance of the building. Internally, the building benefits from chamfered (rounded) edges upon the corners of the 44 x 27mm framing, in keeping with the high standard of construction throughout. For security this product is fully clad, thus light and access can only be provided by the gable end located 1.46m high x 0.757m (2'6") wide single door, securable be the provision of a key lock. As an upgrade in lieu of the single door, a 1.32m (4'2") wide double door can be fitted to the low side section, leaving both gable ends fully clad. Self-assembly by customer (instructions supplied). NB: Please be aware that this traditional pent tool store unit has a maximum height of 1.70m (5'7"), thus less headroom than a typical shed. Manufacturers advise that the building will require re-treating with 6 weeks of delivery/installation and annually thereafter with a quality wood preservative. Approximately 1 foot/300mm should be left around the entire building to aid air flow around the building and access to re-treat.

Only one door is included with this tool store shed unless the double door option is selected under options and choices.

Please note - This product has a 3 inch roof overhang on either side. This isn't included in the external size listed in the detailed specification.

  • Free Treatment
  • Quality Redwood T&g Cladding
  • Traditional Pent Tool Store Includes Felt, Fixings & Instructions
  • Key Operated Lock
  • Fully T&g Boarded
  • Erection Service*
Write Your Own Review
Your review
Rating

All of our products are delivered in a flat packed, sectional format, from the manufacturer / supplier direct to your home and are supplied with full instructions, ready for DIY assembly.

We offer FREE Delivery for orders over £100 to the majority of mainland UK postcodes but some areas may incur an additional carriage charge and a very small about of postcode areas are not covered.

Delivery to every area of the UK cannot be made every day. Some postcodes fall into an extended lead time area. The extended delivery lead time will be in addition to the typical lead time stated. If this applies to you then you will be contacted by our delivery team, please allow up to 10 working days to receive a delivery date.

Our drivers can leave your delivery in a safe place, please indicate this when selecting your delivery day. If you haven't already selected your delivery day, our delivery team will contact you to arrange a convenient delivery date that will be within the lead time shown against the product. Wherever we can, our drivers will deliver the product to the location on your property that you specify, it is important though that the drivers have suitable access and no restrictions for them to be able do this. We would not risk damaging your property whilst delivering a product to an un-safe location. Unfortunately we will not be able to go through your property.