2.97 x 5.22m (9'10 x 17'2) Yardmaster 1017 Metal Garage Reviews
  | Seems like a good garage for the money. Let down only by the doors which are flimsy compared to the rest. It came in many pieces and we found putting it together to be a very time consuming task. a Shedstore customer, Tuesday 09th of November 2010 |
| Very happy with the garage, needed two people to erect both tradesmen would be difficult if no trade involvement a Shedstore customer, Thursday 01st of July 2010 |
| THE GARAGE HAS BEEN BUILT AND MY SON IS REALLY PLEASED WITH IT. IT HAS TO BE SAID THAT IT IS GREAT VALUE FOR THE MONEY WE PAID AND WOULD HIGHLY RECOMMEND THIS PRODUCT TO ANYONE. a Shedstore customer, Monday 10th of May 2010 |
| The "Tin shed" did not disapoint, it is spacious and looks good. It is however not a simple task to erect. It has been subject to a few leaks and condensation in the recent freezing/snowy weather but I would recommend. a Shedstore customer, Wednesday 13th of January 2010 |
| I was able to construct this garage on my own with minimal difficulty. Obviously it took me far longer to complete than recommended for two people. Problems I came across 1.Some of the packaging was damaged and there was some minor dents on some of the panels, while I was not happy with this I did not feel it waranted a big complaint. 2.Some of the frame work pieces had material left behind and I spent perhaps and hour overall just removing small discs from the frames to accomodate the self tapping screws. 3.The base of the walls were fit together using 200mm brackets this was also where the main frame for the walls were fixed into T junctions. Of the 8 Brackets supplied 4 were not wider(or smaller) than the base rails so these joints had to be forced to fit. Due to the gauge of the material it was not too difficult to do this but it was not to my liking. 4.When starting to fit the roof it became apparent that there were not going top be enough self tapping screws. And due to the fact I was doing this on weekend time I lost at least a week sourcing and having to buy the same screws to complete the job. With the two rear panels, the two transparent panels and three of the remaining roof panels fit I ran out of screws both 9&12mm. there was still over half the roof to fit. This was the single biggest and most annoying part of the whole job. I still have enough plastic washers to do another complete garage and possibly more. Overall I am happy with the garage the manual was excellent. I had some small issues with it but was able to work through them, taking breaks and coffee etc. I would like to see gutters on the garage and will have to make some or fit some due to the size of this particular model. A lot of rain falls in these here parts. Good Luck. a Shedstore customer, Wednesday 21st of October 2009 |
Write a NEW review for the 2.97 x 5.22m (9'10 x 17'2) Yardmaster 1017 Metal Garage
