Features
FREE UK Mainland delivery
Low cost and multi-functional
Lightweight - easy to carry
Stores two adult bicycles
Hardwearing and durable
Detachable front cover
Quick & easy assembly
| Specification |
|
| Orientation |
 |
Width = 2.00m
Depth = 0.80m
Height = 1.67m |
|
| Height |
|
Ridge: 1.67m (5'6)
|
Roof
Walls
Floor |
|
Nylon Polyester PP
Nylon Polyester PP
Nylon Polyester PP |
| Door |
|
Detachable zipped front panel |
Windows
Glazing |
|
No
No |
Features
FREE UK Mainland delivery
Low cost and multi-functional
Lightweight - easy to carry
Stores two adult bicycles
Hardwearing and durable
Detachable front cover
Quick & easy assembly
| Description & Notes |
The TidyTent, a low cost outdoor solution of simplicity that offers a variety of storage possibilities - from bicycles to garden equipment. The TidyTent is suitable for virtually any climate, the distinctive arched profile allows rain and snow simply to run off, keeping the TidyTent's contents safe and dry. This model provides an impressive internal storage capacity (large enough for two adult bicycles). When not in use, this product can be easily dismantled, stored and packed away to a compact 54x18x14 centimetre bundle. The TidyTent is manufactured from Nylon Polyester PP, a quality fabric that is tough, durable, hard-wearing and easy to clean. The Nylon Polyester PP fabric combined with the flexible fibre-glass rod chassis, have been specifically chosen to provide a lightweight storage solution. Designed to be quick and easy to install, the TidyTent has a detachable zipped front panel providing the owner with the choice of having the front open or closed - very useful in the summer months when rainfall is less prevalent and access is required frequently. The TidyTent can be installed in a wide variety of locations against walls and fences. The outer edge of the rear panel has 5 fixing points. Simply connect the main fibreglass rods and slide through two sleeves in the nylon/polyester fabric, inserting the ends into the 'feet' in the base panel. Next place the 5 smaller rods into the eyelets in the front and rear panels to stretch the 2 arcs apart. Finally drill up to 5 holes and screw the back panel secure. A number of weight bags are included as standard. These can be filled with sand or pebbles and placed along the edges of the ground sheet inside to prevent the wind from blowing underneath. The recommended installation however is to carefully place a number of old paving slabs or wooden blocks over the groundsheet to provide a more permanent and robust solution. Self-assembly only, instructions supplied.
The Optional Anka Point
The TidyTent has a velcro detachable rear cut-out panel, through which one can fit an optional wall-mounted security bracket known as the Anka Point. The Anka Point is a hardened steel, wall-mounted security bracket, which comes with a set of 'one-way' clutch-head screws and wall plugs. Once attached to your wall or fence this creates a permanent fixture to anchor your goods using your own padlock and chain or cycle lock. The TidyTent and Anka Point together provide a low cost, self-assembly, convenient and weatherproof multipurpose shelter for a serious security solution. |
Ask
technical question upon product
Ask
service question upon product
Our
price watch commitment
Base
information
